Glossary
Short definitions of the terms the posts use, each with a worked example where one exists.
C
- Chargeable weight
- Chargeable weight is the higher of a shipment's real weight and a weight the carrier works out from its space, by volume or by loading meters. How road freight does it.
- Cold storage pallet size
- Cold stores use the standard pallet of their region, the 1200 × 800 mm Euro pallet in Europe or 48 × 40 in in North America. What they limit is height and weight.
E
- EOQ (economic order quantity)
- The EOQ is the order size with the lowest yearly ordering plus holding cost: √(2 × D × S ÷ H). For 12,000 units a year, €60 an order and €2 a unit a year to hold, it is 849.
- Euro pallet
- A Euro pallet (EPAL 1, EUR 1) is a 1200 × 800 × 144 mm wooden pallet of about 25 kg with a safe working load of 1,500 kg. What it carries, and what fits on it.
F
- FEFO
- FEFO ships the stock with the earliest expiry date first, whatever order it arrived in. EU medicines distribution requires it; food warehouses and cold stores use it for dated goods.
- FIFO
- In a warehouse, FIFO (first in, first out) ships the oldest stock first, by arrival. Not the accounting method. Which pallet racks enforce it, which allow it, and which cannot.
- Fill rate
- Fill rate is the share of demand shipped straight from stock. It is not the cycle service level: in the example a buffer for 95% of cycles fills 99.5% of demand.
H
- Honeycombing
- Honeycombing is storage space lost to part-empty lanes or locations that no other product can use. A k-deep lane of one product wastes (k − 1)/2 places on average.
L
- LIFO
- In a warehouse, LIFO (last in, first out) means the newest pallet comes out first, as in drive-in and push-back lanes. When that is fine, and when it ages stock.
- Loading meter
- One loading meter is one metre of trailer length at the full 2.4 m width, 2.4 m² of floor. A Euro pallet is 0.4 LDM, an industrial pallet 0.5, a 13.6 m trailer 13.6.
- Lot number
- In EU food law and in US drug rules a lot and a batch are the same kind of thing, a quantity made under the same conditions; a lot can also be a defined part of a batch. What the number is for.
M
- Minimum order quantity (MOQ)
- A minimum order quantity (MOQ) is the smallest order a supplier accepts. Below the EOQ it changes nothing; near it, it costs little; at several times the EOQ it costs a lot.
- Minimum remaining shelf life
- Minimum remaining shelf life is the share or number of days of life a product must still have when it is delivered. Some buyers ask for 75%: a 12-day product must arrive with 9 days left.
N
- Newsvendor problem
- The newsvendor problem picks how much of a perishable product to stock for one period of uncertain demand, when leftovers and missed sales both cost money.
P
- Pallet overhang
- Pallet overhang is cartons sticking out past the pallet's edge. It can add cartons per layer and costs box strength, up to 41% when two adjacent sides overhang.
- Pallet position
- A pallet position is one place in a rack or on the floor that holds one pallet. Warehouses fit about 1 to 4 per m² of floor, automated high-bay stores mostly 5 to 8. Why positions are not pallets.
R
- Reorder point
- The reorder point is the stock level at which you place the next order: the demand expected during the lead time plus safety stock. 690 + 436 = 1,126 units in the example.
S
- Safety stock
- Safety stock is the stock kept on top of expected demand to cover demand above the forecast and late deliveries until the next order arrives. Formula and a worked example: 436 units.
- Selective racking
- Selective racking is single-deep pallet racking with an aisle beside every row, so every pallet can be reached without moving another. Its selectivity is 100%; its cost is floor space.
- Standard pallet sizes
- ISO 6780 lists six standard pallet sizes, from the 1200 × 800 mm Euro pallet to the 1140 × 1140 mm square. Each in mm and inches, and how many 40 × 30 cm cartons a layer takes.
T
- TI-HI
- TI-HI is the pallet pattern written as two numbers, cartons per layer (TI) and layers (HI). TI × HI is the cartons per pallet. Why TI depends on the layer pattern.